iPreFher

Forgot BIOS Password ?

Do the following :

1. Open the CPU
2. Now, observe the motherboard.
3. You notice a coin like silver Battery(3V).

————————–————— NOTE ——————————————————--
This battery is 24 x 7 power supply for the BIOS, which is used to run the system clock will the main power is off. It also initiates the booting process when power is switched on.
—————————————————————————––——————–——--

4. Remove the battery from the motherboard.
(It is safe to remove the Battery)
5. Wait 30 seconds and place the battery back on the motherboard.
6. Now, when you start your system you won’t be prompted for the BIOS password.

Enjoy !!!
—————————-——– CAUTION ———————————————–
1. Perform on your own risk !
2. You have to set the time of your computer when you start again.
—————————————————————————————-——––-

All latest Motherboards today, 486/ Pentium / Pentium Pro etc.,ensure that upgrades are easily obtained by incorporating the system BIOS in a FLASH Memory component. With FLASH BIOS, there is no need to replace an EPROM component. Once downloaded, the upgrade utility fits on a floppy disc allowing the user to save, verify and update the system BIOS. A hard drive or a network drive can also be used to run the newer upgrade utilities. However, memory managers can not be installed while upgrading.

Most pre-Pentium motherboards do not have a Flash BIOS. The following instructions therefore do not apply to these boards. If your motherboard does not have a Flash BIOS (EEPROM) you will need to use an EPROM programmer to re-program the BIOS chip. See your dealer for more information about this.

Please read the following instructions in full before starting a Flash BIOS upgrade:

(more…)